Filtersafe’s first automatic hydraulic self-cleaning filter is designed for near-zero maintenance. The Trident H will work constantly anywhere, providing a constant stream of clean, filtered water even during the flushing cycle. The Trident Hydraulic series is ideal for agricultural applications, as the filter does not require being attached to a power source.
The Trident H Series Benefits:
- Full operation even during cleaning cycle
- Full 316 stainless-steel construction
- 4-Layer sintered screen with class-leading effective screen area
- Continual operation – No down time when flushing.
- Highly effective cleaning with over 99% recovery rate and full screen recovery
- Horizontal and vertical models available to suit your needs
- Easy access to internal parts
- Failsafe NC Flush Valve
- Bluetooth DC Powered Controller
- Just Plug & Play!
The Trident H Features
80-600 m³/hr.
- Up to 600 m3/h Max. Flow Rate
- 80 – 500 μm Filtration Degree
- 10 bar Operating Pressure
- Less than 1% Backwash Water Consumption
- 2 bar (30 psi) Min. Operating Pressure
- Up to 12,000 cm2 filter area
- AD 2000 Design code
- Temp 65°C
Previous
Next
Our Technology
smartweaveTM high performance
filtration screens
4 Layer Sintered Structure
Enhanced Strength and Durability
High Effective Area
Available in 80-500μm
316 Stainless Steel
Cleaning:
Hydraulic Drive
Reliable Turbine Drive System
Helical Scanner
Low Water Use
Low-pressure Operation 2 Bar
Large Nozzle Size
Low Maintenance
Filtration Process Continues During Flush Cycle
Our Technology
smartweaveTM high performance
filtration screens
- 4 Layer Sintered Structure
- Enhanced Strength and Durability
- High Effective Area
- Available in 80-500μm
- 316 Stainless Steel
Cleaning:
Hydraulic Drive
- Reliable Turbine Drive System
- Helical Scanner
- Low Water Use
- Low-pressure Operation 2 Bar
- Large Nozzle Size
- Low Maintenance
- Filtration Process Continues During Flush Cycle
How our Hydraulic Filter Clean While in Operation:
- The smartweaveTM screen traps unwanted particles. The differential pressure (DP) between inlet and outlet triggers via the flush cycle via a solenoid*.
- The flush enables water from the clean side of the screen to flow back through the screen into the scanner nozzle, removing captured particles on the screen surface.
- At the same time the hydraulic turbine rotates the scanner, and the piston moves the scanner in a linear motion ensuring full coverage of the screen.
- All debris leave the filter through the scanner and flush valve. The flushing cycle ends and the filter returns to its original state.
*All settings determined by controller. Cleaning cycle initiation possible via preselected DP level, specific time, or combination of both. Length of flush is customizable.
