At Filtersafe, we understand that water filtration is essential to helping many industries run smoothly. However, we also understand that today’s filtration technologies can always be improved — which is why we strive to be a leader in the world of water filtration. Our engineers have decades of experience in the industry, and they’re dedicated to creating the top technologies for automatic filtration.
One such technology is the NozzleX suction scanner – an innovative tool that enables the cleaning of organic and inorganic material from your filter’s screen, without wearing down the nozzle or wearing out the screen. With a typical automatic screen filter, the nozzles sit on a bar called a raiser. The raiser moves the nozzle heads back and forth along the length of the screen, while also rotating the nozzles in a corkscrew motion. The nozzles scan the surface, and by using negative pressure, dislodge debris one square inch at a time. While this does help the screen filter water effectively in the short term, the force from the nozzle can damage the screen and shorten its lifespan.
NozzleX, by contrast, uses low head pressure (as low as 23psi) to clear off all the buildup on the screen without damaging it. First, the raisers move the nozzles in such a way that 100% of the screen is scanned and cleaned. Next, in contrast to other filters, NozzleX nozzles safely come into contact with the screen, utilizing gentle pressure to pull materials off of the screen without impacting the screen’s integrity. This results in improved performance and a longer lifespan for your ballast water filter or other filtration technologies.
Why It’s Important
The importance of a properly functioning nozzle is simple – a water filtration system only works when it’s clean. Whether you are filtering ballast water before filling your tanks, protecting your oil and gas exploration equipment safe from organic oceanic materials, or prefiltering water for desalination, each filtration system should have the same thing in common a reliable nozzle to clean your screen.
How it Works
The NozzleX uses passive suction to remove organic matter like debris and sediment from the filter screen. Through an innovative combination of consistent force and passive pressure, whereby the nozzle both actively removes material from the filter while allowing the naturally occurring changes in pressure to carry it away, this nozzle makes cleaning your filtration system an easy and automatic process.
This patented system moves around the filter screen automatically, using as little as 1/32nd the force of typical cleaning nozzles to offer a thorough cleaning with minimal wear. Then, the nozzle disposes of reject water through the system’s flushing chamber, guaranteeing that buildup won’t remain on your screen.
NozzleX is part of Filtersafe’s Everclear cleaning system, which includes the Smartweave screen filter. Working together, these two technologies provide exceptional filtration power while minimizing space. This ensures that operators can use their filtration system as long as possible.
A Closer Look At Other Nozzles
NozzleX vs Dynamic Spring-Loaded Nozzles
While Filtersafe relies on its patented proximity nozzle to consistently clean the screen at any pressure, dynamic spring-loaded nozzles use brute force to ensure their nozzles clean sufficiently at low operating pressure. More force means that both the nozzle and screen wear out faster, in fact, some dynamic spring-loaded nozzles need to be replaced every few weeks!
Floating & Brush-Loaded Nozzles vs Patented Proximity Nozzle
Some nozzles ‘float’ along the screen, never coming into contact with the screen. This reduces nozzle wear but decreases cleaning efficiency and in fact allows dirty backflow to slip out of the nozzle back into the filter’s interior, since there isn’t enough pressure keeping the dirty water inside of the nozzle head and moving towards the flush valve. Brush-loaded nozzles are intended to provide more ‘elbow grease’ to the nozzle’s cleaning capacity. However, the bristles wear out incredibly quickly, leaving the filter owner with what is essentially the previously described undesirable floating nozzle. Even before the bristles break and deform, they can push particles into the screen.
The Patented Concept That Sets Us Apart
Our nozzle is one of the most highly engineered aspects to our filter. Let us explain how this simple yet unique design provides the most effective and durable nozzle available.
Efficient Design
Each nozzle contains just 4 individual pieces. The low number of moving parts reduces the opportunities for something to break. In addition, you will not find a spring anywhere inside our nozzles! While other nozzles use springs to force the nozzle head close to or onto the screen when there is low operating pressure, our patented nozzle design equalizes the pressure inside and outside of the nozzle head, allowing it to be on the screen without utilizing damaging force.
Optimal Screen Interface
Because the nozzle is always firmly on the screen with minimal force, it causes absolutely no damage to the screen. Firstly, the nozzle is always applied with minimal, gentle force on the screen at all pressure ratings, and always less than 350 g/cm2. This means that the nozzle does not push dirt and suspended solids into the screen. This is a not uncommon occurrence that not only reduces the filtration capability of the screen, but can also create holes and invalidate the promised micron rating.
Additional Benefits of NozzleX
In the world of water filtration, NozzleX is truly a revolution. This unique cleaning tool offers several significant benefits to an automated filtration system, which can make a real difference in the quality and longevity of a system. Here are just a few of the unique benefits you can get from using NozzleX:
Continual System Operation
Firstly, NozzleX runs as part of the automated filtration system. There’s no need to halt system operation and clean out your filtration screens; instead, NozzleX will clean your screens throughout the filtration process.
Minimal Surface Area
In addition to its consistent cleaning functionality, the NozzleX is exceptionally compact. The nozzle takes up a mere 1% of the screen area, which allows your filtration system to continue running even while it’s being cleaned, and without significantly hindering the flow rate. This will result in greater filtration capacity and greater overall efficiency for your system.
Improved Performance
Dirty or clogged filters can have a serious impact on a filtration system’s efficacy. In fact, Filtersafe testing has shown that some systems lose performance in as little as six hours due to a buildup of a ‘cake’ like layer of dirt. In that time, a system’s flow rate can drop 37%, but NozzleX maintains a consistent flow rate throughout its operations. With NozzleX, your system always fully recovers so you’ll be able to get the optimum performance from your filtration system all day long.
Zero Screen Wear
Finally, one of the greatest benefits NozzleX provides is the way it minimizes screen wear. Other nozzle-based cleaning systems use significant force to remove debris from their filters, which can lead to punctures and other damage that cuts the screen’s lifespan short. NozzleX, in contrast, equalizes system pressure to use far less force — around 1.6 Bar (23psi) of head pressure. This means your filter screens suffer next to zero wear, allowing them to operate much longer than other screens.
Let NozzleX Clean for You
NozzleX ensures that a filtration system stays clean throughout operations, thereby making sure that the system remains effective and efficient. As part of Filtersafe’s Everclear system, NozzleX will provide users with a completely clean filter screen — and that will help guarantee superior performance from your filtration system.
To learn more about the NozzleX cleaning technology, contact Filtersafe today. Our team will be happy to answer questions and help you find the system that best suits your industry and your organization’s unique filtration needs.